VAAPR Print Surface

More materials.
Less hands-on work.

No scraping, no glue, no flexing.

PLA
PETG
ABS
PC
PolyCarbonate
PP
PolyPropylene
Nylon
Nylon / PA6 / PA12
ASA
TPU
Plus:
CF,
Carbon fibre filled
GF,
Glass fibre filled
Wood,
Wood-filled PLA
Metal,
Metal-filled PLA
Sinterable Metal,
Aluminium 6061, Bronze, Copper, Stainless Steel 316L
PolyCast™,
Investment-casting filaments
HIPS,
Dissolvable support material
PVA,
Water Soluble Support
PVB,
Alcohol-soluble filament
PVC/Vinyl
Standalone print surface. No AutoFarm3D required.
The Problems VAAPR Sovles

Less hassle with every print.

From first-layer failures and warped corners to stubborn removal and constant plate prep, VAAPR eliminates the everyday problems that slow printing down.
Why it Matters

The best print bed is the one you stop thinking about.

On a typical build plate, maintenance becomes part of the workflow: refresh the glue, wash the surface, clean the part, then replace the plate when adhesion becomes unreliable.

VAAPR reduces those repeat tasks so the work stays focused on printing - not preparing to print.

Shop VAAPR

Less preparation

Skip routine glue application and the cleanup that comes with it for supported materials.

Less forceful removal

Let the bed cool and release the finished part rather than prying it free.

Less surface maintenance

Routine cleaning uses mild dish soap and water, not resurfacing or scraping.

Fewer plate changes

Keep one surface in use across a broad range of supported filaments.

See It In Action

Holds tight. Lets go.

VAAPR holds parts firmly on a hot bed, then releases its grip as the surface cools. That change makes finished parts easier to remove without glue or scraping.

Shop VAAPR
ONE SURFACE, MORE MATERIALS

Don't build a different routine for every filament.

PLA one day, ABS the next. VAAPR supports a wide range of filaments without requiring a different print surface for each job.

EASY INSTALLATION

Peel. Apply. Print.

VAAPR applies to a clean magnetic flex plate, much like a screen protector.

01 • Prepare

Let the bed cool, then lift the part away. Flex the plate if needed—no scraping.

02 • Apply

Align VAAPR, peel back the liner, and press it into place.

03 • Calibrate

Follow the installation guide and recalibrate before your first print.

Room to Grow

Manual today. Automated tomorrow.

VAAPR works as a standalone print-surface upgrade. With compatible auto-ejection hardware and AutoFarm3D, it can also be part of an automated production workflow.

FAQ

What is the full material compatibility?

PLA Polylactic Acid

PLA, PLA+, PLA Tough, PLA Pro, Silk PLA, Matte PLA; fiber and powder-filled PLA variants appear under composites.

PETG Polyethylene Terephthalate Glycol

PETG, high-flow PETG (often PETG-HF), PETG-CF and PETG-GF.

PET Polyethylene Terephthalate

PET filament; distinguish PET from PETG in search results.

ABS Acrylonitrile Butadiene Styrene

ABS, ABS+, ABS-CF.

ASA Acrylonitrile Styrene Acrylate

ASA, ASA-CF and related ASA composites.

PC Polycarbonate

PC, PC blends, PC-CF and PC-GF.

PP Polypropylene

PP, PP blends and PP with Glass Fiber.

Nylon / PA Polyamide

Nylon; PA6, PA12, Carbon Fiber filled and Glass Fiber filled.

TPU Thermoplastic Polyurethane

Flexible or firm TPU grades (e.g. 75-80A, 90A, 98A, 55D – 68D).

CF Carbon Fiber Reinforced

PLA-CF, PETG-CF, PA-CF, PC-CF, ABS-CF, ASA-CF.

GF Glass Fiber Reinforced

PLA-GF, PETG-GF, PA-GF, PC-GF, PP-GF.

Wood Wood-Filled

Wood-filled and other plant fiber PLA composites.

Metal-Filled Decorative Composites

PLA-based powder-filled filaments marketed as copper, bronze, brass, iron. These remain polymer composites, not fully dense metal parts.

Sinterable Metal Functional Metal Parts

Metal-powder FFF filaments designed for debinding and sintering, including Aluminium 6061, Bronze, Copper, Stainless Steel 316L Filamet™ by The Virtual Foundry. Must be printed on a sacrificial PLA or PVA raft.

Castable Investment Casting

Castable/burnout filaments, such as Polymaker PolyCast™; used to make sacrificial patterns for investment or “lost-wax” casting.

HIPS High Impact Polystyrene

HIPS, often used as a support material with ABS or high-temp filaments.

PVA Polyvinyl Alcohol

Water-soluble support filaments.

PVB Polyvinyl Butyral

PVB filament, such as Polymaker PolySmooth™; alcohol-smoothable.

PVC / Vinyl Polyvinyl Chloride

PVC-based specialty filaments such as Fillamentum Vinyl 303™.

Do I need to use a special glue with VAAPR?

VAAPR is engineered to be used without the assistance of any sort of glues or print bed adhesives. Keep the bed clean and free of dust for optimal performance.

Which printers does it fit?

Three sizes are currently available for individual purchase:- 225x255mm (Prusa MK3/S/+, MK4)- 256x256mm (Bambu Lab A1, X1C, X1E, P1S, P1P, P2S, X2/X2D)- 335x320mm (Bambu Lab H2S, H2D)Measure your actual bed before you order. Don't rely on the printer's advertised build volume.

How do I put it on?

The VAAPR bed adheres directly to your build plate, and only takes 1-2 minutes to install. Since the adhesive is very strong, you will only have one chance to apply it correctly. Please read the full guide [here](https://docs.3dque.com/docs/installation-guides/vaapr-install?utm_source=chatgpt.com).

What if prints get stuck?

The VAAPR surface ensures that adhesion is near zero significantly once the print has cooled. This way, prints don't get stuck.

Will my first layer warp?

VAAPR has incredibly high adhesion when hot, so your first layer has an even lower chance of warping than on a standard PEI sheet. If you experience warping, make sure you're following our recommended slicer settings.

Do I need AutoFarm3D to use VAAPR?

VAAPR works on its own for seamless manual part removal, enabling you to print difficult high-temp materials and standard materials without the need for multiple build plates or glue sticks. AutoFarm3D combined with our auto ejection kit adds automated ejection if you want it later.

Does VAAPR work with high-temp materials?

Yes. Materials like ABS, ASA, and Nylon release reliably once the bed cools to the proper threshold. Material compatibility information can be found here.

All product and company names are trademarks (™) of their respective holders. Use of them does not imply any affiliation with or endorsement by them.